Rechargeable Anti Bark Vibration Collar Static Shock Vibrate STOP DOG Trainer US

Description

Note:This collar does not have electrical shock!
Kinloon-III
Pet Dog Anti Bark Collar Trainer Stop Barking Training Control Waterproof
Note:
This collar does not have electrical shock!
Specifications:
1.Test product
1A. Charge the bark stopper before use: You can charge the product with an output voltage of 5V through a PC, mobile power, USB or adapter for 2-3 hours.
Power indicator description: When the bark stopper is low, the blue LED will flash quickly.
-Blinking green, device is charging
-Steady green, the device is fully charged
-Steady red, indicating that the device is not charging properly
note:
a. Improper charger means a charger with an output voltage exceeding 5V.
b. The output voltage can usually be seen on the surface of the charger.
c. If the device is charging, there will be no response when the button is pressed
1B. Turn on the power of the bark stopper: Press and hold the button for 1 second to turn on the power. After the device is powered on, the indicator light will be steady red or green.
1C. Press the power button to enter test mode and the display will show the number 0. Then, blow or bark at the microphone sensor on the back of the product like a dog.
1D. The bark responder in test mode: When the device is set to "test mode", whether the mode indicator is red or green, when you blow or shout to the microphone sensor, it will vibrate, beep, and Gives more vibration. The display will automatically show the number 5 after the test is completed or if no test is performed within 10 seconds.
If the product responds as described above, you have successfully set up the bark stopper!
2. Put the product on your pet: Barkstop collar waterproof
2A. Connect the collar to the bark stopper.
Note: If you have a TPU collar in your package, mark the required length and leave a few extra inches (if your dog is young, it will grow more or wear a thick winter coat), then cut Drop the extra parts. Place the cut edge of the belt on the fire for a few seconds to seal the edge.
2B. Put the product around the dog's neck: Make sure it fits snugly against the product, but loosely enough so that one finger can be inserted into the leash and the pet's neck.
3. Mode setting: The following instructions will guide you through the process of switching modes.
-Press and hold the power button for 1 second to power on the device.
-After the device is powered on, the mode indicator will show green or red. Press the M button to switch the mode indicator.
-Green mode indicator indicates vibration mode; red mode indicator indicates strong vibration mode.
4. Sensitivity level: Level 1 ~ 5, level 5 is the most sensitive, level 1 is the least sensitive. Press the power button once to change the sensitivity level.
Product List:
Bark arrestor * 1
Collar * 1
Silicone conductive pillar * 2
USB cable * 1
User manual * 2
Item Specifics
Brand
Unbranded
Modified Item
No
Custom Bundle
No
Animal Type
Dog
Features
Adjustable Levels
Fit
medium and small-sized dogs
Ease of Use
User friendly and easy to use
Non-Domestic Product
No
Type
Collar
Color
Black
Environment Friendliness
Environment friendly
Dog Breed
all dogs
One Size Fits
most
FREE SHIPPING
USA ONLY
Comfort Level
Super Comfortable
Payment
1. We only accept payment via
PayPal
. Please kindly check if you can do the payment via PayPal before placing an order. If you don't have PayPal account, please register at paypal.
2. Payment must be received within 7 days after auctions ended. Unpaid dispute will be filed to eBay for the non payable bidders.
Shipping
1. Items will be shipped within 2 business day of receipt of the verification payment.(except weekends and holidays)
2. We only accept PAYPAL payments and ship them to the address provided by PAYPAL.
3. All items will be inspected before shipment. Please be assured that quality is guaranteed.
4. No local transfer service is available.
Returns
1. This product comes with
30-Days Money Back
Guarantee.
2. If you receive an item and it doesn't work properly or you don't like it because of any reason at all, we have a 100% refund/return policy. We will ship you a new item or refund your money for the full sale amount.
3. For all returned products, buyers MUST contact us for the returning address and a RMA number which should be written on the returned package and can be recognised by the warehouse.
Contact Us
1. We have always been trying to provide the best service and reliable products for every customer. please contact us to resolve any issue before going to a negative feedback.
2. For other information, please contact us and we will get back to you
ASAP
. If there is no reply within 24 hours, please check the spam in the mailbox.
Kinloon-III
Shop Category
Store Home
stage lighting
◈  par can lighting
◈  Magic Ball Light
◈  Laser light
◈  spider light
Consumer Electronics
Home appliance
flashlight
vehicle parts
Other
Hot Item
100W Double Sides Stage Light RGBW LED Spot Moving Head DMX Disco DJ Party Light
USD 61.74
60 Patterns LED RGB Laser Stage Light Projector DJ Disco KTV Show Party Lighting
USD 35.14
120W RGBW Moving Head Stage Lighting LED DJ Party Light DMX Beam Disco Lights US
USD 75.99
Party Disco Lights Strobe LED Rotating DJ Ball Sound Activated Dance Bulb Lamp
USD 13.99
10000lm Portable Zoom Flashlight T6 Tactical Torch + 18650 Rechargeable Battery
USD 8.99
New List Item
Picture Information 105W RGBW LED Spot Moving Head Stage Lighting DMX Pla Light
USD 77.99
4PC RGBW Spider Moving Head 8LED Stage Lights Beam DMX Club Disco Party DJ Light
USD 66.49
120W Moving Head Stage Light RGBW Gobo LED DMX Beam Club Disco DJ Party Lighting
USD 113.99
8PCS Rechargeable Battery Par Can Stage Light 36 LED RGB Wash DMX Disco Show US
USD 49.39
4X 100W RGBW Moving Head Light Stage iBeam Spot DMX Party DJ Disco Lighting US
USD 78.99
Picture
Help & Info
Payment Policy
Shipping Policy
Return Policy
FAQ
About Us
Pet Dog Anti Bark Collar Trainer Stop Barking Training Control Waterproof
Note:
This collar does not have electrical shock!
Specifications:
1.Test product
1A. Charge the bark stopper before use: You can charge the product with an output voltage of 5V through a PC, mobile power, USB or adapter for 2-3 hours.
Power indicator description: When the bark stopper is low, the blue LED will flash quickly.
-Blinking green, device is charging
-Steady green, the device is fully charged
-Steady red, indicating that the device is not charging properly
note:
a. Improper charger means a charger with an output voltage exceeding 5V.
b. The output voltage can usually be seen on the surface of the charger.
c. If the device is charging, there will be no response when the button is pressed
1B. Turn on the power of the bark stopper: Press and hold the button for 1 second to turn on the power. After the device is powered on, the indicator light will be steady red or green.
1C. Press the power button to enter test mode and the display will show the number 0. Then, blow or bark at the microphone sensor on the back of the product like a dog.
1D. The bark responder in test mode: When the device is set to "test mode", whether the mode indicator is red or green, when you blow or shout to the microphone sensor, it will vibrate, beep, and Gives more vibration. The display will automatically show the number 5 after the test is completed or if no test is performed within 10 seconds.
If the product responds as described above, you have successfully set up the bark stopper!
2. Put the product on your pet: Barkstop collar waterproof
2A. Connect the collar to the bark stopper.
Note: If you have a TPU collar in your package, mark the required length and leave a few extra inches (if your dog is young, it will grow more or wear a thick winter coat), then cut Drop the extra parts. Place the cut edge of the belt on the fire for a few seconds to seal the edge.
2B. Put the product around the dog's neck: Make sure it fits snugly against the product, but loosely enough so that one finger can be inserted into the leash and the pet's neck.
3. Mode setting: The following instructions will guide you through the process of switching modes.
-Press and hold the power button for 1 second to power on the device.
-After the device is powered on, the mode indicator will show green or red. Press the M button to switch the mode indicator.
-Green mode indicator indicates vibration mode; red mode indicator indicates strong vibration mode.
4. Sensitivity level: Level 1 ~ 5, level 5 is the most sensitive, level 1 is the least sensitive. Press the power button once to change the sensitivity level.
Product List:
Bark arrestor * 1
Collar * 1
Silicone conductive pillar * 2
USB cable * 1
User manual * 2
Item Specifics
Brand :
Unbranded
Modified Item :
No
Custom Bundle :
No
Animal Type :
Dog
Features :
Adjustable Levels
Fit :
medium and small-sized dogs
Ease of Use :
User friendly and easy to use
Non-Domestic Product :
No
Type :
Collar
Color :
Black
Environment Friendliness :
Environment friendly
Dog Breed :
all dogs
One Size Fits :
most
FREE SHIPPING :
USA ONLY
Comfort Level :
Super Comfortable
Payment
Shipping
Returns
Contact Us
1. We only accept payment via
PayPal
. Please kindly check if you can do the payment via PayPal before placing an order. If you don't have PayPal account, please register at paypal.
2. Payment must be received within 7 days after auctions ended. Unpaid dispute will be filed to eBay for the non payable bidders.
1. Items will be shipped within 2 business day of receipt of the verification payment.(except weekends and holidays)
2. We only accept PAYPAL payments and ship them to the address provided by PAYPAL.
3. All items will be inspected before shipment. Please be assured that quality is guaranteed.
4. No local transfer service is available.
1. This product comes with
30-Days Money Back
Guarantee.
2. If you receive an item and it doesn't work properly or you don't like it because of any reason at all, we have a 100% refund/return policy. We will ship you a new item or refund your money for the full sale amount.
3. For all returned products, buyers MUST contact us for the returning address and a RMA number which should be written on the returned package and can be recognised by the warehouse.
1. We have always been trying to provide the best service and reliable products for every customer. please contact us to resolve any issue before going to a negative feedback.
2. For other information, please contact us and we will get back to you
ASAP
. If there is no reply within 24 hours, please check the spam in the mailbox.
All rights reserved.