Pet Dog Training Collar Electric Shock Collar Waterproof Rechargeable W/ Remote

Description

For #1 dog trainning collar
Product Features:
1.100% Brand-new and High Quality.
2. Frequency: 433.825MHz * LCD display, clear & easy to read .
3. Real Rechargeable and Waterproof Design.
4. Fits all dogs. Suitable for dogs from 20 to150lb .
5. High quality TPU strap is waterproof, fashion and soft. 19in strap can be adjusted any length as you want.
6. Powerful Function Design: Four Functions -- 4 LV vibration, 8LV shock, 3LV collar tracking tone, 3LV remote tone. Three Modes – A Mode, B Mode, AB Mode.
7. Power Saving Design: the controller enters sleep mode after 20s of no operation, and wakes up by pressing any button for 1s; the receiver enters sleep  mode after 20s no movement, and wakes up when moving.
8. 100% tested product with 1 Year Warranty.Buy with confidence.
Specifications:
1. Rainproof collar receiver
2. Remote range : Up to 330 yards
3. Control Modes and Levels:
Static Shock Mode: 0-100 Levels
Vibration Mode: 0-100 Levels
Beep Mode: One level of standard tone
Light Mode: assist seeing dog in low light conditions
4. Nylon Collar Length: adjustable length from 15" to 22" inches, fits dogs from 15lbs-100lbs.
5. Rechargeable transmitter and receiver (Built-in Rechargeable Lithium battery).
6. Remote transmitter controls two collar receivers (Control each collar separately).
7. LCD Display featuring a Blue Back Light for nighttime usage
8. Easy-to-use, ergonomic transmitter.
What's inside:
1 x Rechargeable Pet Training Remote
1 x Rechargeable Pet Training Receiver
1 x Extended Collar
1 x LED Test Light
1 x USB Charging Cable
1 x Charger Adapter
4 x Test Light w/ Rubber Probes
1 x Instruction Manual
For #2 dog trainning collar
Feature:
[3 TRAIN MODES & 5 INTENSITY LEVESLS]: Shock collar for dogs provides standard Beep Mode and 5-intensity (equal to 0-100 levels) for vibration and shock modes, which would correct the dog's bad behavior. Train dogs safely and effectively according to the character of dogs.
[UP TO 2600 FT REMOTE RANGE]: Wireless control for up to 2600 FT remote range, through-wall design can stop your dog from barking even if you're in the other room. You will feel easy to train your dog with this dog shock collar electronic in the park or backyard.
[IP67 waterproof and rechargeable]:The receiver is water-resistant and remote control is rainproof, so you don’t be afraid that your dog is swimming or you’re in heavy rain with it. But it is important that you must pay attention to close receiver's charging port tightly before putting it under water, otherwise it will directly damage the receiver. What’s more, it is so simple and easy to use that you can operate it without looking at remote control.
[Rechargeable and Long Battery Life]: After 2-hour fully charging, the receiver can last for about 7 days standby time and remote control can last for about 30 days standby time without operation, but it depends on how frequently you use.
[CONDUCTIVE SILICONE CAPS]: The conductive silicone caps of this dog shock collar could protect the dogs from accidental shock.This design ensures that safe and humane training are provided for the pets.
[Adjustable collar and comfortable remote control]:The collar strap can be adjusted to fit almost all sizes of dogs. The remote control adopts ergonomic design, which is very comfortable to use and easy to carry.
It is not recommended to use the collar for more than 8 hours. Please close it after training.
What's inside:
1 x remote control transmitter
1 x receiver
1 x collar
1 x test light
For #3 dog trainning collar
Feature:
Range: Up to 1000ft (330 yard)
Water Capabilities: IP67 waterproof
Tone/Vibration Options: 100 Levels of Vibration and 1 Level of Standard Tone
Shock Levels: 100 Levels of Static Shock
Battery Type: Rechargeable Lithium Batteries, charge at the same time
Easy to operate and ergonomic Transmitter
LCD Display for nighttime usage
Light Mode to assist seeing dog in low light condition
100% Waterpoof Receiver
Level: IP67 (Can withstand water equivalent to 0.7 liters per minute if the lid is secured properly)
HOW TO SYNCHRONIZE ?
Please charge before using the product!
Power on the Remote Controller by holding and pressing the side (1/2) button for 3 seconds; (Tips: You can choose channel 1 or channel 2 to pair the remote and the receiver. If you can not pair the device successfully, it may have signal interference. Please pair again at another place.)
Power on the Receiver Collar by pressing the ON/OFF button for about 3 seconds. Click the ON/OFF button 3 times on the receiver to enter the pairing mode. A beep will sound, the Indicator light will turn blue and become solid. You will have 10 seconds to finish the pairing.
Press the yellow, red or green button on the remote, a beep will sound, then the pairing is completed.