LCD Electric 100LV Levels Shock Vibra Pet Dog Training Remote Control E-Collar

Description

Store category
Sign Up Now !
You may also like
LCD Electric 100LV Levels Shock Vibra Pet Dog Training Remote Control E-Collar
Product Description
Description:
LCD 100LV Level SHOCK&VIBRA REMOTE 2 DOG TRAINING COLLAR,
This product is the most effective and safest tool for pet training. Following the correct operation instructions, you can effectively train your pet and make it a docile and adorable creature. This product is for pet training only by training, the pet can understand the intention of its owner. Desirable results can only be achieved after a period of training
.
The life span of the batteries vary to how often you use the product. Therefore you should often check the batteries by hearing the beep from the Collar Receiver and watching the indicator light on the LCD screen of the Transmitter
.
The valid distance of remote control means the straight-line distance between the Transmitter and the Collar Receiver without obstacles in between. If there are interference source around, the actual remote control distance may vary
.
Training sessions should be kept positive and short, about 10-15 minutes each time.
Any movement will activate the Collar Receiver into STANDBY MODE
.
The Collar Receiver will TURN OFF if it is unused for 4 minutes
The Transmitter will go into STANDBY MODE if there is no operation after 20 seconds and turn off after 2 minutes
.
Product Features:
100 levels of vibration.
100 levels of static .
The levels can be altered by use of up & down button.
The system can be used for 2 receivers.(The additional receiver must be the same type as your previous one and purchased from us)
The range is about 100m
Collar Length is adjustable from 8 to 20 inch. Please check the size before purchase
.
1. Easy-to-use, ergonomic transmitter. LCD is provided to display MODE, Level, Channel, and Battery Status.
2. Rainproof receiver for bad weather training.
3. Rechargeable collar and transmitter.
4. 4 training modes: static shock/ vibration/ beep/ flash.
5. Adjustable Intensity under static shock/vibration mode from 1 to 100 level, lower to higher.
6. The remote control distance of this product is 120 meters.
7. Two-dog mode allows the trainer to control two dogs from one transmitter.
8. Power saving design with automatic standby and memory function. (With memory function, if the transmitter and the receiver do not run out of power, the product can work by just turning on the transmitter and the receiver. In other words, there is no need to pair them again in such case.)
9. No external antenna on the collar receiver. Unique built-in antenna in the market.
10. This collar is ideal for small medium and big size dogs.
11. Remote battery: 2 x 4LR44 (
included
)
12. Receiver battery: 2 x AAA (
included
)
13. Adjustable Collar Belt: 18-64cm
14. Red indicator light.
15. IP64
Power Saving
:
1). The Collar Receiver will TURN OFF if it is unused for 4 minutes.
2). Any movement will activate the Collar Receiver into STANDBY MODE.
3). The Transmitter will go into STANDBY MODE if there is no operation after 20 seconds and turn off after 2 minutes
.
Prepare the Remote Transmitter
:
Charge the Remote Transmitter:
1). Connect the charger connector to the charging jack.
2). Plug the charger into a standard outlet.
3). The red light on the Transmitter will be lighted.
4). Charge the Transmitter at least 6 hours for the first charger.
5). After fully charged, the red led will be turned off automatically.
Low battery Indicator(the symbol) :Q will show up on the right down side of LCD screen
.
Use the Transmitter
:
1). To turn on/off the Transmitter,Press the mode button on the Transmitter for 5 seconds.
2). By pressing the Mode button to change to different modes ----the LCD images will change.
3). Press the up and down buttons on right hand side to set level.
4). Choose the different channels for different receivers.
5). The Transmitter will go into STANDBY MODE if not operated for 20 seconds and will TURN OFF if not operated for 2 minutes
.
6). In STANDBY MODE, press any button (except LED light button) to wake it up
.
Prepare the Collar Receiver
:
Charge the Collar Receiver:
1). Connect the charger connector to the charging jack.
2). Plug the charger into a standard outlet.
3). The red LED light inside the Collar Receiver will turn on
4). Charge the Collar Receiver at least 6 hours for the first charge.
5). After fully charged, the red LED light will be turned off automatically.
6). When charging is completed, put the rubber cover in the right position to keep the internal unit from dust and water.
Low battery Indicator:the Collar Receiver will keep beeping for 2 minuets unless It gets charged
.
Connect the Transmitter with the Collar Receiver:
1). Turn on the Transmitter and choose 1or 2 channels to encode.
2). Lift the Reset part of the Rubber cover in the Collar Receiver.
3). Use a toothpick or paper click to insert into the Reset HOLE inside the Collar Receiver.
4). Press the LAUNCH button on the Transmitter immediately while you are hearing a beep from the collar.
5). The Collar Receiver will beep , it means that the Transmitter has encoded the collar.
6). After completion, put the rubber cover in the right position to keep the internal unit from dust and water
.
Note:
1). The life span of the batteries vary to how often you use the product. Therefore you should often check the batteries by hearing the beep from the Collar Receiver and watching the indicator light on the LCD screen of the Transmitter.
2). The valid distance of remote control means the straight-line distance between the Transmitter and the Collar Receiver
without obstacles in between
. If there are interference source around, the actual remote control distance may vary.
3). This product is for pet training only by training, the pet can understand the intention of its owner. Desirable results can only be achieved after a period of training.
4). Training sessions should be kept positive and short,
about 10-15 minutes each time
.
5). Presently, this product is the most effective and safest tool for pet training. Following the correct operation instructions, you can effectively train your pet and make it a docile and adorable creature
.
Please attention that all our collars are
NOT
waterproof.
Packing List
1
x
Remote
2
x
Receivers
2
x
Collar Belts
1
x
Test Lamp
8
x
Conducting Pole
1
x
User Manual
2 x 4LR44
Remote battery
(
included
)
2 x AAA
Receiver battery
(
included
)
Payment
Shipping
Returns
Contact Us
FAQ'S
Payment
PayPal accepted.
Shipping
Our items will be shipped out from New Jersey, United Stated.
Returns
Toosell-Outlet offer a 30-day warranty on ALL ITEMS.
Contact Us
You are welcomed to contact me for any question. I will reply your email in about 24HRS in business days.
FAQ'S
Q: Where do you ship from?
A: We shipped from New Jersey, United States.
Q: When will you ship out the item and can I have the tracking NO.?
A: Item will be shipped within 2 business day upon payment received(Holidays excluded), and of course, tracking will be updated to you ASAP.
Q: Do you offer combine shipping and combine shipping discount?
A: Yes, we offer combine shipping and We provide free Expedited Shipping for order amount over 0.