ENLIGHTED CU-4E-FMH LIGHTING/OCCUPANCY CONTROL DIMMING MODULE, 0-10V, 100-277V

Description

ENLIGHTED CU-4E-FMH LIGHTING/OCCUPANCY CONTROL DIMMING MODULE, 0-10V, 100-277V. Retail 2.89
Shipped FREE
Product details
Fixture Mount Control Unit is wired to a fixture LED driver/dimming ballast to control light levels. Connects to Enlighted sensor units which contain microprocessors and sensor arrays that integrate occupancy, daylight, and temperature sensing. Sensor unit monitors occupancy, vacancy, and light readings and is controlled by the Enlighted Control Unit to adjust values based on criteria programmed to the the Enlighted Control Unit (Gateway, Sensors, Cables, and Control Unit Sold Separately) Includes latching relay to ensure low power usage.
Enlighted CU-4E-FMH Fixture Mount Control Module, Dimming 0-10V, 5A, 100-277V
Overview
The Enlighted Fixture Mount Control Unit interfaces with Enlighted sensors and ballast or LED drivers to control light behavior intelligently. The Control Unit also contains a power metering chip that enables the Enlighted control network to measure power in real-time as well as energy consumption over time.
The Fixture Mount Control Unit (CU-4E-FMH) is designed to be mounted inside fixtures and NEMA-rated enclosures. Sheet metal screws are typically used to mount the Control Unit in these environments. Mount the full-length CU-4E-FMH in place of the CU-3E, or remove the break-off tab to create a smaller form factor for a reduced footprint.