Bluetooth Smart Device Eprad Drive-In Movie Speaker With Traditional Pole & Base

Description

Bluetooth Smart Device Eprad Drive-In Movie Speakers With Traditional Round Powder Coated Metal Pole and Base
We’re excited to announce our amplified lighted Smart Device Eprad Drive-In Movie Speaker Set with Silver Metal Pole and Base. After extensive testing with various amps, we finally found the ideal amp that fits our junction box nicely. The amplifier delivers stereo sound, rated at 8 watts per channel, and is over surge protected. Our amplified stereo speaker combination produces a good mix of high/low, and mid-range sound. Included is a built-in on/off power switch that operates the amplifier and LED light. The LED light bulb illuminates the red diffuser lens and top of the speaker pole. We’re also supplying a 3-foot 5.5MM extension power supply cable that attaches to the amp and down the pole to power supply. This amplifier requires 12 volts to power up. A 3-foot 110 volt power supply is included to convert 110 household power into 12 volts for the amplifier. Keep in mind, our set-up could operate on any 12 volt applications, such as your car cigarette lighter. Perfect addition for your classic car shows, recreational room, around the pool, or even man cave.
Amplifier specifications.
Bluetooth 4.0 Amplifier specifications.
• Voltage: DC 12 Volt
• Dimensions: 4.8cm x 8cm
• Channel Type: Dual Channel
• Output Impedance :4Ω • Output Power: 8W +8W (4Ω speaker)
Speakers/Junction box/Pole and Base Details:
(2) Eprad speakers with Junction box.
These speakers are still manufactured by us Detroit Diecast using the original casting molds from the 1970's.
The casting are made of aluminum.
The internal components are all new.
This includes 4 inch, 4 ohm waterproof speakers, volume controls, new Detroit Diecast retractable curly cords.
The Junction box (J-Box) is also new which includes a red defuser.
Silver Powder Coated Drive-In Movie Speaker Metal Pole And Base
Our heavy duty round base were designed to support our unique 2 inch metal pole for Drive-In Speakers.
Total weight of the base is just under 8 pounds. Professionally painted silver powder coat.
Total length of 11 inches. 2-1/2 inches high from top to bottom. Easy to assemble, top plate is made of metal, seated on a weighted plastic coated base.
Includes Silver Powder Coated Detroit Diecast Drive-In Movie Speaker 2 Inch Outer Diameter Metal/Steel Junction Box Base Support Pole.
This heavy duty Steel 3-foot pole was designed to support our unique Drive-In Speaker base holder.
The Outer diameter (OD) of the pole is 2-inches. One end attaches to the base, the other to Drive-In Speaker Junction box.
Retaining plate incorporated in bottom of pole to support pole to base.
Retaining bolt and washer included.
Access port in bottom of pole to allow power source wires up into the pole to Junction box.
We added a black grommet to protect your power source wiring.
Total weight of the pole is just under 5 pounds.
*The speakers have been tested to ensure functionality.
So get ready to Rock and Roll with your new set of vintage Drive-In Speakers
.
Drive-In's run deep in our family history, as past generations have owned and operated several theaters. We truly hope you enjoy our products, as they are very nostalgic to us and others. Currently, we are still manufacturing brand-new Drive-In speakers from the original molds. Our products are made right here in the USA! Specializing in rare Drive-In movie theater memorabilia from the 50′s, 60′s and 70′s. Vintage speakers are our specialty, too. We have one of the fastest growing collections of restored and unrestored Drive-In speakers around.